Description
MADE IN KOREA!!!!
2x120g/box x 6 boxes = 12 bottles of gel
EFFECTS AND FEATURES
1. After applying the gel on mold and mildew around bathtub, washstand and silicone of window frame, it removes mold and mildew cleanly 2-3 hours later.
2. As it is gel type, and so does not flow down in vertical and inclined surface, it is easy to clean up with water.
HOW TO USE
1. Remove moisture with tissue or dry cloth. (If moisture remains, the gel does not stick well, and has less effect)
2. Open the lid and apply at the thickness of 3 min where mold and mildew occur.
3. Wash out with water or wipe out with wet cloth after 2 to 3 hours. (Tip! Apply before bedtime and clean in the morning)
4. According to wall and wallpaper, spread gel with sponge and brush.
5. Try again if mold and mildew stains cannot be completely removed.
CAUTION
1. Used as directed only and be sure to wear rubber gloves before use. May cause eye and skin irritation.
2. Be sure to close the lid after use and keep out of children's reach. In case of eye contact, flush eyes immediately with water for 15 minutes. For skin contact, rinse skin with water. If irritation persists, discontinue use seek medical attention.
3. Rinse thoroughly so that no residue is left behind.
4. Have enough ventilation when used in confined space.
5. Be careful not to get into contact with clothing or it can be bleached.
6. Do not mix with other detegents for use. Toxic gases may occur.
7. Risk of some discoloured or deformed on imported tiles and bath or special silicone, test on blind spot before use.
8. Keep at room temperature away from the direct sun light/high temperature/low temperature.
2x120g/box x 6 boxes = 12 bottles of gel
EFFECTS AND FEATURES
1. After applying the gel on mold and mildew around bathtub, washstand and silicone of window frame, it removes mold and mildew cleanly 2-3 hours later.
2. As it is gel type, and so does not flow down in vertical and inclined surface, it is easy to clean up with water.
HOW TO USE
1. Remove moisture with tissue or dry cloth. (If moisture remains, the gel does not stick well, and has less effect)
2. Open the lid and apply at the thickness of 3 min where mold and mildew occur.
3. Wash out with water or wipe out with wet cloth after 2 to 3 hours. (Tip! Apply before bedtime and clean in the morning)
4. According to wall and wallpaper, spread gel with sponge and brush.
5. Try again if mold and mildew stains cannot be completely removed.
CAUTION
1. Used as directed only and be sure to wear rubber gloves before use. May cause eye and skin irritation.
2. Be sure to close the lid after use and keep out of children's reach. In case of eye contact, flush eyes immediately with water for 15 minutes. For skin contact, rinse skin with water. If irritation persists, discontinue use seek medical attention.
3. Rinse thoroughly so that no residue is left behind.
4. Have enough ventilation when used in confined space.
5. Be careful not to get into contact with clothing or it can be bleached.
6. Do not mix with other detegents for use. Toxic gases may occur.
7. Risk of some discoloured or deformed on imported tiles and bath or special silicone, test on blind spot before use.
8. Keep at room temperature away from the direct sun light/high temperature/low temperature.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
